Mobile Phone Case Hot Press Machine
Power: 5KW 8KW 12KW
Voltage: 380V 50/60Hz 380V 50/60Hz 380V 50/60Hz
Frequency: 27.12MHz 27.12MHz 27.12MHz
Input Power: 8KVA 15KVA 25KVA
Send Inquiry
Product Details ofMobile Phone Case Hot Press Machine
Product Introduction
Do you often struggle with low efficiency and poor pressing quality when mass-producing phone cases in 3C accessory factories? Traditional single-station hot presses require repeated waiting for heating, resulting in a daily output of less than 2,000 pieces; ordinary equipment has uneven temperature control, leading to weak welding and burn marks on case edges, with a defect rate as high as 8%.
This Mobile phone case hot press machine is designed to solve these pain points: With left-right dual sliding tables operating alternately, it enables simultaneous "hot pressing + loading/unloading," allowing a single worker to boost daily output to over 3,200 pieces. Equipped with a constant-temperature precision control die head, temperature error is ≤±1℃, ensuring seamless edge bonding and clear textures for phone cases. It also features a built-in intelligent spark protection and electromagnetic shielding system, which protects the die while blocking high-frequency radiation-making it a core device for 3C accessory factories to improve delivery efficiency and product quality.
Product Features
Dual Sliding Table Alternating Operation System: Left and right sliding tables switch automatically, with hot pressing and loading/unloading running in parallel. This eliminates idle time in single-station setups, increasing production efficiency by 60% compared to traditional equipment and adding over 1,200 pieces to daily shift output.
Constant-Temperature Precision Pressing Technology: The die head uses zoned temperature control, achieving 98% temperature uniformity. This boosts edge welding strength of phone cases by 40%, reduces burn mark rates to below 0.5%, and significantly cuts after-sales rework costs.
Intelligent Safety Protection Module: Built-in spark detection sensor cuts off high voltage in 0.1 seconds, reducing die wear by 70%; equipped with an electromagnetic shield, high-frequency radiation meets CE safety standards, ensuring workshop operational safety.
Product Parameters
| Item | Model 1 | Model 2 | Model 3 |
| Power | 5KW | 8KW | 12KW |
| Voltage | 380V 50/60Hz | 380V 50/60Hz | 380V 50/60Hz |
| Frequency | 27.12MHz | 27.12MHz | 27.12MHz |
| Input Power | 8KVA | 15KVA | 25KVA |
| Pressure | 350KG | 350KG | 500KG |
| Sliding Stroke | 150MM | 150MM | 150MM |
| Pressing Size | 300×120MM | 300×120MM | 300×120MM |
| Pressing Time | 0-10S | 0-10S | 0-10S |
Place Detail Page Pictures
Application Scenarios
Mass Production of Phone Cases: Traditional equipment has low daily output and frequent burn marks. This machine's dual sliding tables enable continuous operation, with daily output exceeding 3,200 pieces. It is compatible with TPU/leather materials, expanding production to waterproof phone cases.
Tablet Case Pressing: Ordinary equipment has insufficient pressing area. This machine supports custom large-size die heads, enabling seamless pressing of 10-inch tablet cases and improving edge fit by 35%.
Logo Embossing for Small Leather Goods: Manual embossing is inefficient with blurry patterns. This machine's constant-temperature embossing technology achieves 99% logo clarity, suitable for processing small leather goods like earphone cases and card holders.
FAQ
Q: What materials of phone cases can the equipment process?
A: It is core-compatible with TPU, leather, EVA, and other materials, and also supports composite fabric cases. Sample testing for adaptability is available.
Q: Will high-frequency radiation affect the workshop environment?
A: Equipped with a professional electromagnetic shield, the radiation level is below 0.5mW/cm², meeting EU industrial safety standards and not affecting surrounding equipment or personnel health.
Q: Can the equipment process other products besides phone cases?
A: After replacing the dedicated die head, it can expand to hot-press processing of 3C small accessories such as tablet cases and earphone storage boxes, covering multiple production categories with one machine.
Q: Does the equipment require dedicated personnel to monitor operations?
A: The dual sliding tables operate alternately automatically; only manual loading/unloading is needed, no full-time monitoring is required. One worker can manage 1-2 machines simultaneously, reducing labor costs.
Q: What is the warranty policy for the equipment?
A: The whole machine comes with a 12-month free warranty; core components such as electron tubes and rectifiers have a 6-month warranty. Lifelong cost-price maintenance services are provided.
Q: Can custom-sized pressing die heads be made?
A: Custom die heads are supported based on product dimensions; die opening is available with CAD drawings. Die replacement takes only 5 minutes, adapting to multi-specification production.
Q: What is the energy consumption level of the equipment, and is it energy-efficient?
A: It uses an intelligent temperature control system, automatically entering low-power mode when no processing is needed. Energy consumption is about 20% lower than traditional hot presses, saving electricity costs in long-term use.
Q: Can the equipment adapt to phone case materials of different thicknesses?
A: It supports materials 0.5-3mm thick; adaptation can be achieved by adjusting pressure parameters via the touch screen, no core component replacement is required.
Hot Tags: mobile phone case hot press machine, China mobile phone case hot press machine manufacturers, suppliers, factory, heat press for t shirts, the heat press for t shirts, heated vacuum press, heat press label machine, Automobile Embossing Hot Press, heat seal press machine
Send Inquiry
