High-frequency welding machines often experience faults after prolonged use. These faults should be identified and addressed promptly to minimize production disruption.
When welding results are unsatisfactory or welding fails, possible causes include incorrect equipment settings, blown fuses, and other issues not related to the equipment itself. The initial solution is to first check the equipment parameter settings and circuit fuses.
If air bubbles appear on the workpiece during welding, this is usually not directly related to the equipment. Possible causes include loose connections, a damaged or clogged gas regulator/flow meter, or debris on the workpiece surface. The initial solution is to check and tighten the gas line connections, clean or replace the flow meter, and clean the workpiece surface.
If the voltage is unstable during welding, this is also unrelated to the equipment. Possible causes include loose connections between the main unit and the sub-unit, a deformed induction coil, insufficient spacing between coils, or a loose induction coil. The initial solution is to check and tighten all electrical connections and correct or secure the induction coil.
If the equipment suddenly stops working during use, immediately turn it off and check the main unit. Wait 3-5 minutes before turning it back on. If restarting does not work, a professional technician must be called for repair.
This requires users to be proficient in using the equipment and to accurately diagnose and resolve malfunctions promptly, thereby minimizing waste and losses to the equipment and production.
