Product Introduction

In the agricultural irrigation pipe processing field, mass welding of PVC water pipes has long faced two major pain points: Traditional manual welding only completes 200 meters per day, and joints often leak due to uneven fusion, with a rework rate of up to 15%; ordinary equipment has limited working space, failing to stably adapt to 10-20CM diameter pipes, and the pressure resistance of finished products is less than 1MPa.

This Large PVC water pipe welding machine is designed to solve these problems: It is equipped with a high-frequency heat-sealing fusion system, which can accurately weld 5-20CM diameter PVC water pipes, increasing joint fusion strength by 40% and stabilizing pressure resistance at 1.2MPa; combined with an automatic feeding slide for continuous operation, the daily welding length exceeds 600 meters, 150% more efficient than traditional methods. It also has a built-in intelligent overcurrent protection module, which automatically cuts off power in 0.3 seconds when overloaded, greatly reducing core component wear, making it a professional device for small and medium-sized irrigation engineering enterprises to improve pipe welding efficiency and quality.

Product Features

High-Frequency Uniform Fusion Welding Technology: Uses high-frequency electromagnetic fields to achieve "internal heating" fusion of PVC materials, with a joint fusion depth of over 1.5mm, leakage rate controlled below 0.2%, and finished pipes fully meeting the pressure standards for agricultural irrigation.

Automatic Feeding Continuous Operation System: Equipped with a long-stroke automatic feeding slide, supporting continuous welding of 5-meter-long water pipes without frequent manual docking, increasing single-shift output by 400 meters compared to traditional equipment and greatly shortening project delivery cycles.

Intelligent Overload Protection Mechanism: Built-in dual monitoring modules for current and temperature, which immediately cut off power when the device is overloaded, reducing the failure rate of core components by 50% and effectively extending the device's service life.

Product Parameters

Item	Model A	Model B
Power	10KW	15KW
Voltage	380V 50/60Hz	380V 50/60Hz
Frequency	27.12MHz	27.12MHz
Input Power	20KVA	30KVA
Welding Diameter	50-150MM	80-200MM
Sliding Stroke	1000MM	1200MM
Welding Speed	1.0M/min	1.2M/min
Pressure	600KG	800KG

Place Detail Page Pictures

Application Scenarios

Mass Welding of Farm Irrigation Pipes: Traditional manual welding is inefficient with high leakage rates. This device achieves 600 meters of welding per day through continuous operation, improving joint waterproofing by 98%, suitable for main irrigation pipe processing in orchards and vegetable fields.

PVC Cloth Water Belt Splicing for Greenhouses: Manually spliced cloth water belts are prone to cracking under tension. The high-frequency fusion of this device increases joint tensile strength by 35%, suitable for lightweight irrigation scenarios in greenhouses and nurseries.

Small Municipal Drainage Pipe Processing: Ordinary equipment cannot stably weld pipes over 15CM in diameter. This device supports welding of pipes within 20CM, with 1.2MPa pressure resistance meeting the needs of residential and rural drainage pipes.

FAQ

Q: What material of water pipes can the device adapt to?

A: It is core-adapted to PVC water pipes, and also supports welding of flexible materials such as PVC cloth water belts. Adaptability tests can be conducted with samples for other materials.

Q: Will the high-frequency radiation of the device affect operational safety?

A: The device is equipped with a professional electromagnetic shield, with high-frequency radiation below 0.5mW/cm², complying with industrial safety standards and not affecting the health of operators.

Q: Can the device process other products besides water pipes?

A: After replacing the dedicated mold, it can be extended to seam welding of PVC waterproof cloth and small PVC tarpaulins, covering more processing scenarios of lightweight waterproof products.

Q: Does operating the device require professional training for new employees?

A: No professional training is needed; the device's touch screen has built-in common parameters, and new employees can operate independently in 30 minutes after learning basic operations such as feeding and mold replacement.

Q: What is the warranty policy for the device?

A: The whole machine enjoys a 12-month free warranty, core components such as the high-frequency generator and feeding slide have a 6-month warranty, and lifelong cost-price maintenance services are provided thereafter.

Q: Can welding molds for different pipe diameters be customized?

A: Customization of molds for any diameter within 50-200MM is supported; molds can be made with diameter parameters, and mold replacement takes only 10 minutes.

Q: What are the shipping ports and transportation methods for the device?

A: It is shipped from Yantian Port, Shenzhen by default, and supports sea, land, and air transportation, which can be flexibly selected according to your time requirements.

Q: Can the device adapt to PVC water pipes of different thicknesses?

A: It supports PVC water pipes with a thickness of 2-5mm, which can be adapted by adjusting the fusion parameters through the touch screen, without replacing core components.

Hot Tags: large pvc water pipe welding machine, China large pvc water pipe welding machine manufacturers, suppliers, factory, High Frequency Welding Machine, large high frequency welding machine, Large PVC Bag Welding Machine, Large PVC Water Pipe Welding Machine