Product Introduction

When mass-producing PET blister packaging traditional equipment either performs welding and cutting in separate steps which easily causes misalignment during material transfer or processes in a single-station serial manner resulting in half the time spent waiting. This PET Blister HF Welding and Cutting Machine adopts a 4-station turntable design where each station can complete blister bonding and edge cutting in one go. The four stations operate in rotation with no interruption between loading and processing doubling the efficiency compared to single-station equipment. Whether it is thick hardware blister shells or thin food trays the edges after synchronous sealing are neat and firm ensuring fast and stable mass production.

Product Features

4-Station Cyclic Operation with No Idle Time Four stations work in rotation processing and loading proceed simultaneously maximizing the effective operating time of the spindle. The production capacity is more than twice that of single-station equipment.

Single-Station Synchronous Sealing and Cutting One station completes welding and cutting in a single operation eliminating the need for two-step processing or material transfer. It ensures precise packaging dimensions and burr-free edges.

Stable and Accurate Positioning of Indexing Turntable Equipped with a high-precision indexer the turntable operates without vibration. The positioning error of each station does not exceed 0.2 millimeters ensuring neat bonding between blister and paper card without skewing.

Quick-Change Molds for Multi-Spec Adaptation Molds adopt a quick-release buckle design allowing 4-station mold replacement in minutes. Switching between hardware packaging and food trays does not require stopping the production line enabling efficient connection of multiple orders.

High-Sensitivity Spark Protection Equipped with a high-sensitivity spark protection system it automatically cuts off high-frequency current when sparks occur effectively protecting the equipment molds and products and reducing losses.

Product Parameters

Item	YJ-HF-8KW	YJ-HF-12KW	YJ-HF-15KW
Power	8KW	12KW	15KW
Voltage	220V/380V 50/60Hz	380V 50/60Hz	380V 50/60Hz
Frequency	27.12MHz	27.12MHz	27.12MHz
Input Power	15KVA	25KVA	30KVA
Rectifier	Silicon Diode	Silicon Diode	Silicon Diode
Electron Tube	7T69RB	8T85RB	8T25RB
Pressure	500KG	800KG	1000KG
Interval	150MM	180MM	200MM
Inner Size	120MM	150MM	180MM
Upper Size	200×300MM	250×400MM	300×500MM
Lower Size	200×300MM	250×400MM	300×500MM
Welding Time	0.2-5S Adjustable Synchronous Sealing and Cutting	0.2-5S Adjustable Synchronous Sealing and Cutting	0.2-5S Adjustable Synchronous Sealing and Cutting

Place Detail Page Pictures

Application Scenarios

Mass Production of PET Blister-Card Packaging for Hardware Accessories Hardware packaging requires high welding firmness and neat edge cutting. Traditional separate-process equipment is prone to looseness and burrs. This 4-station machine performs synchronous sealing and cutting with an output of 1200 units per hour. The welding pull force of thick blister is not less than 50N and the edges are clean without the need for secondary trimming making it suitable for large-scale mass production orders.

Food-Grade PETG Blister Tray Synchronous Sealing and Cutting Food trays need to meet safety standards and sealing requirements and thin PETG films are easily pierced. The machine optimizes energy output for thin materials producing no harmful substances during processing. The sealed trays are leak-proof suitable for small-batch multi-flavor food packaging production needs.

FAQ

1.Is the welding strength sufficient for thick PET materials used in hardware blister packaging after synchronous welding?

A: Yes The 12KW and 15KW models have pressures of 800KG and 1000KG respectively. Paired with synchronous molds the welding pull force between thick PET blister and paper card is not less than 50N meeting industrial packaging firmness requirements.

2.Can PETG materials used for food trays pass food contact safety tests after processing?

A: Yes The machine adjusts gentle energy output for food-grade materials producing no harmful substances during processing and fully meeting food packaging safety standards.

3.Will the edges from synchronous sealing and cutting have burrs or uneven cuts?

A: No The machine uses synchronous welding and cutting molds with the cutting blade precisely matching the welding area. The edges are neat and smooth without the need for secondary trimming.

4.Will the turntable positioning accuracy decrease after long-term use?

A: No The turntable uses a high-precision indexer and wear-resistant materials. After long-term use the positioning error still does not exceed 0.2 millimeters maintaining consistent batch packaging dimensions.

5.Can product models be embossed on blister packaging synchronously?

A: Yes Customize a synchronous mold with the product model Embossing can be completed during processing with clear and firm models no need for additional engraving processes.

6.If one of the four stations malfunctions can the other stations still work normally?

A: Yes The four stations are independent units. The faulty station can be shut down individually and the remaining three stations continue to operate in rotation without affecting the overall production progress.

Hot Tags: pet blister hf welding and cutting machine, China pet blister hf welding and cutting machine manufacturers, suppliers, factory, Automatic HF Synchronous Fusing Machine, HF Welding and Cutting Machine, HF Welding Machine with Cutting Function, PET Blister HF Welding and Cutting Machine, Plastic Sealing and Cutting Machine, synchronous fusing hf welding machines